| Uses of and Instructions for Storage
|
|
|
|
01.
Water Purifier
_ Nationwide Tap Water
, Industrial Water, Industrial Wastewater, Municipal Sewage
02.
Paper Sizing Agent
03. Dye Production
04.
Cosmetics Production
05.
Precipitation of Ceramic Materials
06.
Pharmaceutical Production
07.
Raw Materials for Various Kinds of Aluminum Chemicals |
|
|
|
The inside of the container should be resistant to corrosion using a rubber lining, FRP, an epoxy resin or polyethylene. In case of leakage, neutralize thoroughly with slaked lime, baking soda and calcium carbonate.
|
|
|
|
01.
Handling Precautions
|
|
Wash the substance off immediately if it stains clothing. Otherwise, the clothing will be damaged. Wash the substance off completely if it comes in contact with your skin. If you leave it as it is for a long period of time, it will roughen your skin. Wash it off immediately if it comes in contact with your eye. If the situation is serious, consult your eye specialist. Wearing a safety glass is a very good idea.
|
|
|
|
02.
Storage of Aluminum Sulfate in Winter
|
|
Aluminum sulfate can freeze in winter due to the evaporation phenomenon on the inside wall of the tank. As the liquid temperature goes down, the nuclei of AL2(SO4)3 28H2O goes up and begins to close the pipe laying.
Therefore, keep in mind the following facts
|
|
|
|
03.
Insulation
|
|
Keep the pipe laying, the valve, the pump and the small tank warm.
(Be especially careful with parts exposed to outside elements. If possible, keep them warm using a steamer/heater.)
|
|
|
|
04.
Dilution
|
|
Check the specific gravity of the aluminum sulfate at around November, and dilute it under 1.327/20 if it is above 1.327/20.
|
|
|
|
05.
Insertion of Low-concentration Products
|
|
In cold areas, freezing can occur if the pipe laying is thin or distant, due to the slow flow rate. In this case, the insertion of a low-concentration product could be helpful.
|
|
Give us a call if the substance still freezes after the above instructions are performed.
|
|
|
|
|
|
|
